PTFE extruder Wood shredder servo hydraulic milling machine ptfe paste extruder ptfe ram extrusion ptfe liner ptfe extrusion
 __ CommonTec designed the new CGT-P1 Pallet Shredder for the highest efficient recycling job *** CommonTec Extrusion Technology: CommonTec developed the new CEP600 "dualspeed" Paste extruder for broader high quality production range of paste extrusion. *** CommonTec develops test field software for DaimlerChrysler. *** CommonTec develops test rig electronics for Airbus industry. *** CommonTec developed electronic components for TRANSRAPID
Home

Hydraulic
Electronic
Recycling
Extrusion
Milling machinery
Solar
Technology



Used
Equipement
t

Service

Contact
Impressum
Conditions

Service

References

Unbenanntes Dokument

 

used machinery & prototypes

CommonTec offers from time to time used equipment out of
leasing agreements or prototypes of new developments
.

warranty period : 12 months

POS
DISCRIPTION
Price
152

WK Worek FRE200-V70 -Used Ram extruder-

Ramextruder FRE200-V70 (still in use)

We have to sell this ram extruder for our customer. The extruder is still in use and will be modernized with complete control system including DExControl®

Technical Data
Maximum extrudate
200mm OD
maximum compressiv force
700kN (70tons)
Heating zones
8 Zones
Feeding systems
2 Engelhard Dosing systems

Ram extruder FRE200-V7 -Commontec-

Ramextruder FRE200-V70 -CommonTec-

Ramextruder FRE200-V70 -CommonTec-

Ram extruder FRE200-V70 -CommonTec-

call for details
143

Wood grinder CGT400 with dual drive

This wood grinder is a brand new developement. Designed and produced in Germany with the known quality standard. The design is based on the CGT400-3045. but with much more power. Our engineers called that machine "the most impressive wood grinder with the most advanced technology". It is a combination of power and high tech and will satisfy in each way.

Rotor / Cutting system
The solid rotor with 400mm diameter is driven by two 60hp E-Motors. One of each side is the best way to eliminate a possible bending of the rotor and the shafts. The transmission is realized by two heavy duty gearboxes. A torque of more than 8600Nm breaks all kind of wood or plastic down to particle size. The rotor is equipped with 160 diamond shaped cutters . The cutters are made of special steel and afterwards in 3 steps heat treated.

Framework
The framework is very solidly and strong designed. All parts were very carefully selected. The heavy duty bearings are largely dimensioned and for a long life span calculated. All parts of the machine are easily accessible. Hinged doors covers all parts. An automatic greasing system reduces the maintenance to a minimum.

Hydraulic powered Ram
The heavy ram is powered by a 18hp servo hydraulic unit. A full ram stroke is made in less then 10 sec. Speed and pressure is regulated by a processor controlled electronic unit. This electronic unit is the same, that we use in an AIRBUS test field. The time of reaction is reduced to a minimum. That gives us the possibility of letting the machine always run on highest efficiency without any overloads.

Control panel
A very important renewal is the control panel. The machine is equipped with several sensors. Ram force, ram speed, rotor torque are monitored by the new control panel. With the measured values the controller calculates in a self learning procedure and compute the optimized settings.
Of course the settings can to be made manually or it be able to preselect different material types (bark, small hardwood, pallets, large wood blocks,...).

Technical data


Type

CGT400-4075 wood grinder

Main drive

2 x 60hp E-Motor

Rotor length

1320 mm (52inches)

Rotor diameter

400 mm (16inches)

# of Cutters

168 Cutters

Ram stroke

1000 mm (40 inches)

Hopper size

3 m3 (4 Yard3)

Hydraulic unit

18hp unit (air cooled)

screen size

1/2" (alt. 3/8",3/4",1",1 1/2")

Power supply

400V,50Hz,3p (alt.480V,60Hz,3p)

Note

This wood grinder was used in our plant only for test runs. The machine was approx. 185 hours under power. Before the distribution the machine will be equipped with new cutters and cutterbars.

68.000 USD
49.200 EUR

C-Mail

148

Wood shredder CGT400-145

Challenger Wood shredder formerly used as pallet shredder.

 

Technical data

Rotor diameter 300mm
Rotor Length 1320mm
Cutting system
80xMCut

E-Motor 45kW 400V/50Hz (optional other voltages available)

Hydraulic unit

 
Volume
30L
E-Motor
3.0kW , 400V/50Hz
Valves
4/3-proportional valve for press cylinder
pressure relief valve up to 160 bar
   

Feedingssystem

hopper feeding
   
Control panel  
PLC
Mitsubishi
Human interface
Mitsubishi E150
Breaker /Contactor
SIEMENS
   
Discription

The wood shredder is complete renewed and includes

used frame
new cutting system
new hydraulic unit,
new eletcrical parts
new PLC with advanced PLC program
new cylinder
new hopper
The wood shredder is pretested and ready for operation

Options screen set
  different voltage
  customized hopper design
32.500 EUR
147

Ramextruder Frame FRE 75 complete modernized with CER075-Parts

Ramextruder FRE75 complete modernized to CER075 for rods and tubes

 

 

Technical data Extrusion range 3..75mm
Compressive force 100kN
Heating 4 Zones
   

Hydraulic unit

 
Volume
80L
E-Motor
5,5kW , 400V/50Hz
Valves
4/3-proportional valve for press cylinder
4/3-valve for mandrel
4/2-valve for pressure
pressure relief valve up to 160 bar
   

Feedingssystem

vibration feeder
stainless steel hopper
stainless steel shaking conveyor
   
Control panel  
PLC
Mitsubishi
Heating conrtol
Mitsubishi- Heating controller
(PLC-integrated)
Human interface
Mitsubishi E150
Breaker /Contactor
SIEMENS
   
Discription

The Ramextruder is complete renewed an includes
used frame
new hydraulic unit,
new eletcrical parts
new PLC with advanced PLC program
new stiring device with new gearbox drive
new cylinder
new feeding system
The ramextruder is pretested and ready for operation

   
   
   


28.800 EUR
-SOLD-

C-Mail

     

 

 
 
 
   
 
CommonTec Milling machine