PTFE extruder Wood shredder servo hydraulic milling machine ptfe paste extruder ptfe ram extrusion ptfe liner ptfe extrusion
 __ CommonTec designed the new CGT-P1 Pallet Shredder for the highest efficient recycling job *** CommonTec Extrusion Technology: CommonTec developed the new CEP600 "dualspeed" Paste extruder for broader high quality production range of paste extrusion. *** CommonTec develops test field software for DaimlerChrysler. *** CommonTec develops test rig electronics for Airbus industry. *** CommonTec developed electronic components for TRANSRAPID
Home

Hydraulic
Electronic
Recycling
Extrusion
Milling machinery
Solar
Technology



Used
Equipement
t

Service

Contact
Impressum
Conditions

Service

References

Unbenanntes Dokument

CommonTec Recyling
Wood grinder

The CGT wood shredder series formerly known as Challenger wood grinder was developed in 1992, in order to offer to the market a size reduction technology, which works under heaviest conditions efficiently and reliably. The machine should be also characterised by small current consumption and low maintenance costs. The mechanic of the woodgrinder should do the job under 24/7-conditions. Special attention was put on the cutting system. The new developed cutting rotor for the Challenger carried out up to 3-5 time more than all well-known systems. For a aggressive size reduction system like this a conventional frame was not sufficient. The frame was designed very substantial. All parts were used in very heavy design. The result of this challenge was a wood grinder, which could be called with good reason the best woodgrinder of the world. We are proud that there are imitators, who copy still these machines in the USA.(Note)
CommonTec doesn't rest on it and developed constantly the machines, in order to be able to offer to the customer always the optimum, that it rightfully expected.
Today, the CommonTec wood grinder is still based on the challenger wood grinder, but with much more sophisticated accessories and technology. The former version of this wood grinder was regulated by the power consumption. Today all relevant components are equipped with sensors, in order to control the machine carefully to the maximum efficiency. All movements and forces at the machine are monitored. Possible overstress or power loss is recognized immediately, regulated and announced at a display.
The hydraulic unit is equipped with proportional components, in order to speed up the time of reaction and is controlled by a high speed prozessor. The machine can be connected to the DCONTROL supervising system and operated in remote control.

Video Wood Recycling videoclip

Data sheet Rotor Stroke Power Space Weight Troughput
Model ( mm ) ( mm ) ( kW ) ( mm x mm) ( kg ) ( kg / h )
CGT200-1 660 550 15 / 18 / 22 1800 x 1200 1600 200 - 1200
CGT300-1 990 800 22 / 30 / 37 2600 x 2000 3500 300 - 1600
CGT400-1 1320 800 37 / 45 / 55 2600 x 2300 4000 500 - 2400
CGT400-2 1320 800 2 x 22 / 30 / 37 2700 x 2700 4500 600 - 3000
CGT500-1 1650 1100 45 / 55 3000 x 2700 4800 700 - 3000
CGT500-2 1650 1100 2 x 37 / 45 / 55 3000 x 3100 5200 700 - 3300
CGT600-2 1980 1100 2 x 37 / 45 / 55 3000 x 3500 5700 800 - 4200
CGT700-2 2310 1500 2 x 45 / 55 / 75 3400 x 3800 6300 900 - 4800
CGT800-2 2640 1500 2 x 55 / 75 / 90 3400 x 4200 7600 1000 - 5100
CGT900-2 2970 2000 2 x 75 / 90 / 110 3900 x 4500 9100 1100 - 5400
CGT1000-2 3300 2000 2 x 90 / 110 / 150 3900 x 4800 9900 1200 - 6000

 
 
   
 
CommonTec Milling machine